Parts

- Reduces the risk of flats caused by nails, rocks, etc. - Sold by pair

Wolf Tooth's SDM chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM chainring. There are 3 offsets: 0mm, 3mm, and 6mm - 49mm chainline, 0mm offset for BB30 short-spindle cranks - 52mm chainline, 3mm offset BB30 - 47mm chainline, 6mm offset for cyclocross and road cranks - 49mm chainline, 6mm offset for GXP and long spindle BB30 Boost Notes for use with Fat Bikes: - If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. - If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset

These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch rings feature a our patented Drop-Stop design for the best wear life, chain retention and mud clearance. - CNC machined aluminum ring fits Race Face cranks with Cinch System - Features Drop-Stop tooth design to prevent unwanted chain drop - Asymmetrical tooth shape for the best wear life, chain retention and mud clearance - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy

The direct mount chainrings for SRAM cranksets replace your existing spider and chainring with one clean-looking, lightweight, and stiff piece of machined billet. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability. Compatibility These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets, including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8-bolt mounting interface that is not compatible with these chainrings. Specifications: - Boost: 3mm offset for 52mm chainline - Mount type: Direct Mount for SRAM - Offset: Boost - Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains

These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch rings feature a our patented Drop-Stop design for the best wear life, chain retention and mud clearance. We have both Boost and standard chainrings. - CNC machined aluminum ring fits Race Face cranks with Cinch System - Features Drop-Stop tooth design to prevent unwanted chain drop - Asymmetrical tooth shape for the best wear life, chain retention and mud clearance - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy

Designed for Race Face CINCH cranks with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. - Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075-T6 aluminum for long life - Use of a clutch-style rear derailleur is recommended - 52mm chainline / 3mm offset for boost spacing

Designed for Race Face CINCH cranks with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. - Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075-T6 aluminum for long life - Use of a clutch-style rear derailleur is recommended - 52mm chainline / 3mm offset for boost spacing

- Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Front hub: Formula DC20 (Black), Laser etched logo, M9x100mm - HG Freehub compatible with 8—10, MTB 11-speed - 6-bolt disc mount - Adjustable bearings - Quick-Release binder included - Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Valve and Tape not included)

The new Vittoria Mazza combines years of athlete input with cutting-edge tread technology, raising the bar on the mixed terrain Enduro tire category. Starting with a defined center tread, the Mazza uses deep siping in the direction of rotation, allowing the tire to roll fast while still opposing drift, especially in off-camber terrain. The stepped leading edge rolls like a ramp but digs in on climbs, making Mazza a top choice for both front and rear use. Substantial spacing was designed into the center tread to provide braking traction, while also accelerating mud clearing. Cornering on the Mazza is handled by Vittoria's trademark progressive sipe width technology, which gives a gummy inside effective edge without the instability that competitors experience on the outside of the tread. Simply put, bigger sipes flex more than smaller sipes. This unique siping pattern creates asymmetrical tread flex and translates into a predictable, confident, and communicative feel at the limit of cornering. Mazza's generous tread depth claws into a range of terrain and is stabilized with Vittoria's proprietary 4C compound layering process. Four separate Graphene 2.0 compounds are layered, allowing the surface of the tread to remain tacky while the base remains planted. This ensures each effective edge is kept in place under high cornering and braking loads, leading to reduced rolling resistance and increased wear life. The bar has been raised. - Aggressive profile with ample sipe spacing for mixed terrain - Progressive sipe width for tactile grip on rocks and roots - Stepped leading-edge center-tread maintains speed and delivers climbing traction

- Features a tread pattern very similar to the Ritchey Alfa Bite

- Economical tire

You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Material: Al-7050 - Width: 800mm - Backsweep: 9-degrees - Rise: 25mm - Upsweep: 5-degrees - Colors: Black

TruVativ Power Spline Bottom Bracket fits proprietary powerspline design popular as OE spec with many moderate-price TruVativ cranks. • Proprietary spline design popular as OE spec with many moderate-price TruVativ cranks • Crank bolts are included

- Use without washers for two chainrings, with washers for one DH ring - Bolts and nuts use hex keys - Includes 15 pieces total; 5 nuts, 5 bolts, 5 washers - Length: 8mm - Material: Steel - Type: Hex

For serious gravity aficionados only. The ATAC DH 4 is built like a tank for big drops, big rocks – the most extreme downhill trail conditions. The ATAC DH 4 is a downhiller’s dream featuring an aluminum body and oversized hollow steel axle. The ATAC system allows you to ‘put a foot down’ and clip it back in when needed. The open, self-cleaning design keeps the trail off the pedal, clearing debris and mud every time you clip in.

The ATAC Easy cleats are specifically for the mountain bike pedal and City Bike range of TIME (LINK, MX and XC range). The release angle of 10-degrees is easy for riders who want a quick step out. - Weight: 44g/pair

Under 200 grams per pedal, the ATAC MX 2 is super versatile and super affordable. The easy-to-clip-in ATAC system, large platform, and self-cleaning design make this the perfect choice for cyclists venturing off the road for the first time. The ATAC EASY cleat makes set up a breeze and clipping in and out even easier.

Made for cross country MTB riders, the ATAC XC 2 pedal features the easy engagement and self-cleaning design of the ATAC system (TIME patent) and the durability of MIM (metal in mold) arches and a steel axle, all at an affordable price. The ATAC XC 2 is also suitable for cyclocross, trail riding, and bike touring.

The ATAC MX 6 is the perfect pedal for mountain, trail explorers, and fat bike riders. With its oversized hollow steel axle and a composite body, it's light and rugged enough for any trail conditions. The ATAC system makes clipping in super easy and by swapping the cleats you have 2 release angle options (13º or 17º). ATAC's open, self-cleaning design means you'll always be able to clip in—even in the muddiest of conditions. - Includes ATAC cleats - Steel bearings - Release angle: 10° with ATAC Easy cleats, 13° or 17° with ATAC cleats - Weight: 380g

Speciale 8 is Time's enduro pedal directly inspired by the renowned Sepciale 12. This enduro pedal is composed of an aluminum body that's slightly more compact than its big sister. You'll appreciate its stable platform with 4 adjustable spikes for optimal grip even unclipped and the micro-adjustable clamping system that meets the demands of the most advanced bikers. The patented ATAC engagement system (TIME patent) allows for easy insertion and positive, predictable release, as well as self-cleaning design, even in the toughest conditions. The Speciale 8 is entirely assembled in France in Time's Nevers factory, thus exceeding the highest standards in terms of materials and production.

The ATAC XC 6 is made for XC mountain bike riders and gravel cyclists. It features a chromed, hollow steel axle for lightness and durability, and a composite body and tension adjustment to adjust the feel of the pedal. The exclusive ATAC system (TIME patent) offers very easy engagement, while its open design automatically clears debris each time you step in. The ATAC XC 6 is also suitable for cyclocross, trail riding, and bike touring. - Includes ATAC cleats - Steel bearings - Release angle: 10° with ATAC Easy cleats, 13 or 17° with ATAC cleats - Adjustable tension with 3 different spring positions - Weight: 290g

- Aero levers for use with linear pull brakes - Lightweight ergonomic design - Forged aluminum lever - Quick release mechanism

- BMX aluminum levers for caliper or U-brakes - 2-piece hinged clamp

Siliconez are the grip of choice for top world cup XC racers looking for both weight savings and performance. Feeling is believing with Supacaz’s patented memory foam attributes that mold to your hand providing consistent grip in any condition. The shock-absorbing qualities reduce fatigue of not only hands but the entire upper body. - Material: Silicone Foam - Diameter: 32mm(sl), 34mm(xl), 36mm (xxl) - Length: 130mm - UV resistant - Latex-free

- 9 speed wide range - 11-40t - Steel spider

- 10 speed wide range cassette - Steel spiders - Fits Shimano/SRAM freehub - 494g (11-42); 458g (11-40)

- Black polymer spacers - Multiple speed options available

- Steel cogs - Composite spacers

The SunRace MZ 12-Speed Cassette offers a wide ratio design. - Shimano compatible 12-speed cassette

Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.